Characterization of Minerals, Metals, and Materials 2019

Part 1. Characterization Methods.- On FIB Milling Parameters.- Part 2. Characterization of Ceramics.- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag.- In-situ XRD Investigation of Bauxite Dehydroxylation.- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery.- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production.- Part 3. Characterization of Non-ferrous Metals.- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery.- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature.- Part 4. Microstructure and Performance of Materials.- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina.- Part 5. Characterization and Uses of Metallurgical Slags.- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials.- Characteristics of WISCO Steelmaking Slags.- Effects of Civil Construction Waste on Properties of Lining Mortars.- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers.- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System.- Propagation of Power Ultrasound in Calcium Ferrite Melt.- Part 6. Characterization of Polymer and Composite Materials.- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers.- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals.- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers.- Effect of Neomycin in PVP Hydrogel as Wound Dressing.- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test.- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum.- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers.- Part 7. Analysis of Surfaces and Interfaces.- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces.- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method.- Intergranular Cracking of High Strength Alloyed Brass Rods.- Part 8. Mechanical Behaviors of Materials.- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining.- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel.- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets.- Part 9. Characterization of Powder Materials.- Characterization of HPGR Pre-treated Sinter Feed.- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite.- Study on Application of Iron Ore Fine in Pelletizing.- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts.- Part 10. Mineral Processing and Analysis.- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India.- Humic Acid-based Silica Composite Aerogels--A Preliminary Study.- Characterization of Non-covalently Functionalized Halloysite.- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria.- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay.- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation.- Part 11. Nanostructure and Characterization of Materials.- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption.- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites.- Part 12. Thermal Processing and Analysis.- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel.- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy.- Characterization of Coke-making Coals of High Reactivity from Northwest China.- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt.- Part 13. Poster Session.- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties.- Adhesion Study at Advanced Ages in Multipurpose Mortars.- Applications and Opportunities of Nanomaterials in Construction and Infrastructure.- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel.- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry.- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber.- Clay Smectite Synthetic: Characterization and Application in Nanocomposites.- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints.- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues.- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites.- Evaluation of the Quality of Concrete with Waste of Construction and Demolition.- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties.- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric.- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler.- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams.- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design.- Influence of the Blocks and Mortar’s Compressive Strength on the Flexural Bond Strength of Concrete Masonry.- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure.- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites.- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric.- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black.- Mineralogical Analysis of A Chrome Ore from South Africa.- Pilot Trial of Detoxification of Chromium Slag in  Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt.- Preparation of Refractory Material from Ferronickel Slag.- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate.- Research on the Interaction of Humic Acid with Iron Minerals.- Study of Different Process Additives Applied to Polypropylene.- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray.- Study of the Incorporation of Residue of Ornamental Rocks in Ceramic Tiles.- Study of the Incorporation of Smectite in Powder Coating.- Study of the Mineralogical Composition of the Tailings of Coscotitlán, Hidalgo, Mexico.- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams.- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais.